Wood-plastic is a composite material. made by the combination of wood powder/fibers with plastics. It is a waterproof and insect resistant material which neither corrode nor rot. What is more, it does not need to be painted or oiled and is molded and produced. in a variety of desired textures and designs.

By adding minerals and pigments to the structure of this composite, products with desired colors can be produced. Wood-plastic composites are new materials compared to the timber used by humans for construction for many years. Composites are materials that are made from a combination of two or more other materials to have the desired properties.
Wood-plastic composites were first introduced to the decking industry about thirty years ago. Manufacturers believe that Wood-plastic composites are more environmentally friendly than other wood alternatives and require less maintenance care. In the United States, plastic is mostly used in outdoor flooring and many other applications such as railing, fencing, covering and maintenance, beautification, park benches, windows and door frames, and interior furniture.

Depending on the application of Woodplastic composites, materials such as binders, pigments, UV stabilizers, lighteners, and oils are used in its production.

Wood-plastic composites can be produced from recycled plastics such as high-density or low-density polyethylene, PVC (polyvinyl chloride), ABS, polystyrene, polyethylene, etc., which the most common products are based on polyethylene.

The most common method for producing woodplastic composites with different cross-sections is the use of the extrusion method, in which wood particles and thermoplastic plastics are mixed and heated together and then removed from the mold in the desired shape. With wood plastics that are produced by the extrusion method, custom profiles can be produced for various applications.

Injection molding is another method of producing wood-plastic composites. Using the injection molding method, wood-plastic composites parts can be produced for various other applications, from the inner lining of the car door to the protective frame of the mobile phone.

The same mechanical tools that are used to work with wood can also be used for wood-plastic composites. Wood-plastic composites are known as sustainable materials by considering the fact that, after a life cycle, one wood-plastic composite can be easily recycled into another wood-plastic composite. Wood-plastic composites can also be produced from recycled plastic and wood that cannot be used in the wood industry anymore.

Wood-plastic composites have a considerable lifespan

and one of the significant advantages of wood-plastic composites over woods

is that they can be produced in almost any physical shape.

Some types of wood-plastic composites can be used to bend and make arches. Additionally, they do not need to be painted and are produced in different colors.

Although 55% (up to 70%) of the weight of wood-plastic composites is usually cellulose. their mechanical behavior is very similar to that of neat polymers.

This means that woodplastic composites are more flexible than wood. Moreover, wood-plastic composites are very resistant materials which neither corrode nor rot caused by insect attacks.

Wood-plastic composites are a subset of a larger category called “natural fiber plastic composites” that can contain non-cellulosic fibers. Therefore, woodplastic composites can also contain other natural and non-cellulosic materials.

The products of Choobin Plast Group include a wide range of woodplast profiles, which includes various designs, colors and sizes; Its applications include flooring, building facades, roof gardens, pavilions, pool covers, flower boxes, pergolas, city furniture, paintings, ceiling louvres, ship decks, docks, spaces, stairs, railings, etc.

The post Wood-plastic composites appeared first on choobinplast.

In addition, Plast wood flooring has good properties such as fire resistance, water resistance, anti-corrosion, moisture resistance, insect repellent, no fungal growing conditions, resistance to acids and alkalis that are toxic and contaminants. It does not produce the environment, yet it costs less to maintain. Plast wood flooring has a similar appearance to wood, it is more resistant than plastic, has a longer life and as a result has a higher strength.

In addition to all the good features of Plast wood flooring, we can also mention its light weight. It is resistant to heat, has a smooth surface, is free of formaldehyde and other harmful substances.

Plast wood flooring is a new type of protected and environmentally friendly composite material

that has replaced wood in recent years. It can be used in garden design,

interior and exterior wall decoration, pool design and artificial ponds.

Plast wood flooring facilities

Given the appearance of plastic wood, it is difficult to say that it is not a real wood.

So in appearance it is not much different from wood.

It is made in different thicknesses such as 2.5 cm and usually the bottom layers make it thicker,

which makes it a substitute for many vinyl floors.

It has a very hard and durable coating.

Great for hot and humid surfaces.

They are quick and easy to install and most of them do not require any additional covers, glue, nails or screws.

It is very resistant to water and stains and it is very easy to clean.

Noise absorption and insulation.

The last thing you can expect from a floor is that it does not make noise when walking.

Plast wood flooring is sound insulation and absorbs sounds.

This way the floor can be installed in the upstairs room and will never be a nuisance to those downstairs.

Plast wood innovation around the pool

Plast wood around the pool is called flooring that is good against water, does not rot after a while, does not crumble and has special grooves that make it easier for people to move. Plast wood around the pool is one of the best products on the market.

Pools or floors should be used next to the pools that have the conditions to face the environment, and in general, the water level is important in this regard. Plast wood is one of the suitable materials in this field and is offered in various designs and colors. It is clear that this product is evaluated in the market at certain tariffs and each one is evaluated based on its quality.

Profile of plastic wood around the pool

Natural wood and plastic are used in the production of Plast wood. If the amount of wood used in this product is standard, it can be considered similar to wood. On the other hand, composites are produced in different colors and designs. One of the important advantages of plast wood is its durability and high resistance, which occurs in direct contact with water. Natural wood types will crack over time when in contact with water and cover many cracks, while plastic wood rarely cracks and cracks in front of pool water, and people who are supposed to be around the pool with Walking barefoot will not be a problem either.

The durability and resistance of Plast wood against moisture and water is high. It is known that there is a large amount of polymer resins that are in PP and PE models and are used in the manufacture of floors that are made of plastic-wood with high strength, this causes water to not be absorbed accurately. Note that Plast wood does not need annual maintenance and repair and is in good condition in terms of cost.

Anti-slip property of plastic wood around the pool

The use of wood and plastic together and according to the process that is considered, causes the traffic by the pool to be done accurately and the head level to be minimized so that people do not have any problems. It is clear that these products are designed and implemented due to their position, some of its models are a bit slippery and may be more in terms of using plastic than wood, and those who intend to buy this style must be satisfied with this issue. The technology used in the latest Plast wood around the pool is such that the location around the pool is determined and the best material is used for high-traffic areas.

In the best case scenario,

those who plan to walk around the pool should also be able to wear special shoes.

The new design of the pools is such that the appropriate surrounding space

should be provided with the pool floor,

and this has led to the innovations used in the design and production of plastic wood

around the pool to be provided accurately.

It is clear that the modernization of this part of the pool

can be an advanced and acceptable approach and consider strict policies.

Plast wood flooring around the pool

should be such as to prevent the pool from getting dirty in the wind and dust.

The thermal energy loss of the pool water should be reduced by 85%. It should also provide the necessary safety for children to move so that they are not thrown into the pool. On the other hand, the location of these floors is such that they can be very durable and its installation will not require special expertise, and fortunately, the additional costs in this area are limited.The inherent structure of Plast wood is such that it is made of wood and plastic, it absorbs very little water, and this has prevented the material from swelling and inflating. Plast wood has good flexibility and for this purpose, they use this material in humid environments such as toilets, bathrooms, yard space, and roof gardens.

It can be said that Wood Plast has good resistance in various fields.

Since Wood Plast has the lowest absorption of water in landscaping,

the probability of cracking will be very low and close to zero,

and for this purpose, Plast wood material is used a lot in the open air and by the pools.

Other properties of plastic wood include low modulus of elasticity and this number is about one tenth of wood. Therefore, products made of plastic wood can come in different shapes and forms, which is a matter of high flexibility when designing products with Gives plastic wood. This is due to the large amount of plastic in the production of wood plastic.Of course, the strength of plastic wood is also related to its correct and principled substructure, and the substructure must be done according to a special standard to increase the resistance of plastic wood against damage such as cracking, breakage, deformation, etc. The color used in the production of plastic wood in the roof garden is also very important and high quality paint should be used, although the amount of mixing materials in a dark curtain or light material will also be effective.

What is a gabion?

Combining new and modern materials with old materials, they create new shapes that help designers create new events. Today, with the advancement of technology, old materials can be used in a new way and special designs can be created. Gabion is a kind of use of old materials in the form of modern designs. Gabions, plastics and other materials inspired by the traditional style can help a lot to create new designs.

Gabions were originally used in structures such as dams. canal floor coverings, breakwaters. building retrofits. stone wall restraints. and side roads to prevent mountain falls. But today, gabions are used in the construction of urban and outdoor furniture. landscaping, waterfront construction and in interior design as wall coverings or space dividers.

Some buildings are sometimes built only with gabions.

and gabions, in addition to structural use.

also have a beautiful use in these buildings.

and an integrated and beautiful building is created.

Gabions, along with materials such as wood, wood plastic, PVC sheets and other modern materials, create special and beautiful designs and are widely used in decorating the facades of buildings, landscaping and roof gardens, and as materials. It can be used with long life. Gabion is a metal container in which all kinds of decorative stones are poured and helps to make your landscaping and roof garden more beautiful. Gabion is very cost-effective and can cover a large part of the roof or yard.

The green wall is the term used to create a barrier between two spaces,

which is created by creating green space and vegetation.

The green wall can separate the two spaces alone or be installed on a wall separately.

The task of the green wall, if installed on a wall,

will be to give freshness and beauty to the wall,

but if it is created as a wall alone, it can also be used to divide the space.

Green wall is widely used in roof garden and landscaping. There are usually several common ways to build a green wall that we will mention.

In some spaces, the planting medium or the planting box is located at the bottom of the green wall

and vegetation is created by planting tall plants or climbing plants on the entire surface.

In another type of green wall, which is mostly used in landscaping and roof garden,

small boxes and containers are spread all over the surface and planting is done at short intervals.

These planting containers are also called wall flower boxes. .

Green wall irrigation can be done intelligently or manually. Smart irrigation is done in such a way that the plant is watered in a certain period of time in a few days of the week, depending on the type of plant that has been planted. In the manual irrigation method, the highest row of flower boxes is irrigated and water overflows from the lower chamber of each flower box to the lower flower box. In this method, we must be careful that special layers must be placed in the wall flower boxes to provide salts and nutrients. Do not waste soil.

What is a Tree Box? Enclosures used for planting shrubs in the roof garden or landscaping are called tree boxes. Tree boxes are actually flower boxes that are made almost equal in length and width and are for planting shrubs with medium to high dimensions, and for this reason, the height of these boxes should be higher than flower boxes than the plant. Find the growth capacity and the so-called planting space is not too narrow for the plant.

Tree boxes are very useful in

roof garden and landscaping and are used to create a retaining wall in green roofs and landscaping.

Placing tree boxes on the roofs of houses and planting tall plants and shrubs can be seen as annoying. Restricted or blocked by annoying winds or strong sunlight.

Flower boxes are made in two ways:

portable and fixed for the roof garden,

which are usually made of building materials in the fixed state and metal sheets and cans in the portable state.

In the portable box, the inner layer is made of galvanized sheet, which increases their durability by painting it in the form of a furnace powder. The chassis used in these tree-boxes is made of metal cans that have the task of bearing the weight and separating the box from the roof surface so that air flows under the box and moisture does not damage the roof surface in the long run. The inner layer of the box and flower boxes can also be made of plastic and can be replaced in case of damage. The top material of the boxes is made of wood or plastic wood, in addition to creating beauty, it creates a sense of harmony with the roof garden and landscaping of projects. Other protective layers are also used inside the boxes, which will be explained in more detail later.

Design and execution of facade and board of wood plastic

Wood plastic facade

Execution of wood plastic facade is done in different ways and depends on the project conditions,

but in most cases, to implement Plast wood facade requires high-strength chassis.

Plastic wood display

Chassis in the facade of the building is done by metal profiles

and this profile is usually done by profiles with a cross section of 6 × 6-4 × 4-3 × 3,

which are in one direction with a distance of 100 cm and in the direction

It is made perpendicular to it at a distance of 35 cm.

This network that has been built now has the ability to accept profiles and their weight.

Plast wood profiles need to be screwed to 35 cm every 35 cm to avoid complication,

and for this purpose the lowest profile is screwed to the cans,

and then a clip that is made of compressed plastic and has high resistance in the groove.

The profile is placed and from now on the clips are screwed

into the can and the plastic wood profile itself is not screwed.

At the end of the work, the final profile is screwed so that the top and bottom of the work are well closed and the work is completed properly. If a 15 cm plastic profile is used in the facade, grooves and seams can be seen between the profiles. But if 10 cm plastic profiles are used, the distance between the profiles can no longer be seen because these 10 cm plastic profiles overlap.

Plast wood panel

The method of painting the wood of Plast panel is the same as the facade of Wood Plast

and it still needs to be chassis and the profiles must be paged through the clips at the specified intervals.

With Plast wood material, beautiful facades can be easily designed and executed.

Advantages of Plast wood facade:

High execution speed

Resistance to weather conditions

Resistance to intense sunlight

Variety in size and dimensions

The price is right

Variety of colors compared to wood

The post Features of wood plastic flooring appeared first on choobinplast.

Install plastic wood flooring:

Wood plastic installation has two steps, which include pre-installation tips and the plastic wood installation process.

Consider the following before starting to install Plast wood :

Due to the structure of Plast wood, this product is able to withstand a weight of approximately 450 kg per square meter.

Consumption of Plast wood material to cover surfaces and decorative matters, necessarily requires metal substructure.

Start the installation operation so that other construction work is completed.

Wood profiles should be stored 48 hours before installation in a dry place away from the sun and indoors at the project site (due to temperature).

The work surface is completely clean and all the necessary tools are available.

It is never possible to screw Plast wood from the face except for some properties (Plast wood due to the existing contraction and expansion has the ability to remove the screws over time or remove the screw mud and only skilled Plast wood installers That can prevent this from happening by adhering to the necessary standards).

When starting the substructure operation, it is necessary to level the substructure in both vertical and horizontal directions.

You will definitely need a substructure to install plastic wood. Substructure or chassis is done using metal profiles (40 × 40 iron cans) or special profiles made of Plast wood. Keep in mind that if you use iron profiles for chassis, be sure to cover them with paint (stainless) to make them resistant to rust and corrosion.

Due to the importance of substructure in beautification and the strength of plastic wood flooring, it is necessary to double the substructure cans by installing the profiles longitudinally in the divorce place of 2 profiles, which is usually done for every 150 cm.

When laying the chassis, great attention should be paid to the distance between the profiles, and this distance should be a maximum of 25 cm for floor-to-ax flooring and a maximum of 35 cm for the facade.

To install Plast wood on the metal mesh,

special clamps (clips or T-clamps) are used,

which are used to screw the Plast wood material with screws to the substructure surface.

For any screw installation,

be sure to drill the desired location with a drill and avoid making holes with screws on the work surface.

The longitudinal distance between Plast wood profiles during installation should be 3 mm.

The screws used must be made of galvanized or steel of suitable length.

After completing the substructure steps, the profiles of each area are cut and put in place. These profiles are fastened to the substructure by fasteners called clips. These clips make it easy to move any profile from place to place in the future. Clips are available in two forms, polymer and metal, which fix the profile and adjust the distance between the profiles.

When installing the profiles, it is important to observe the transverse and longitudinal distance between each profile. The maximum transverse distance between each plastic wood profile that is placed next to each other is 6 mm. The maximum longitudinal distance from the apex between each profile is 3 to 6 mm. These distances are to control the longitudinal and transverse expansion of the profiles in different climates.

 The slope of the substructure floor should be about one percent (to direct running water)

Metal cans should be installed in the direction of the slope of the bed to drain water.

If it is not possible to drain water between the cans, it is better to use a base under the cans.

The screw used for the substructure should be made of galvanized material.

At the beginning and end of the work, clips are used to adjust the distance and fix.

Plast wood profiles should not have a free beginning and end,

which means that the beginning and end of all profiles must be on the substructure.

Avoid the following mistakes during installation:

Putting shackles inside the cement

Insert constraints without following recommended intervals

Insertion of restraints without observing expansion joints

Place restraints without spacing the wall

Tighten the screws too much

Easy drainage and air circulation should always be ensured.

Plast wood veneer installation:

Before installing the facade, you must make sure that the work surface is level.

For facade substructure, it is better to use 30 × 30 mm metal cans and to prevent corrosion of metal cans,

it is necessary to use stainless steel.

In case the facade is completely made of Plast wood material,

metal substructure is done on the facade with all the mentioned conditions and the Plast wood material is restrained by using a clamp on the metal substructure mesh.

In the case that in Plast wood facade, it is done in combination with any other material, it is better to apply that material first and then Plast wood profiles are applied on the facade so that they are not damaged during execution. At this time, due to the sensitivity and difficulty of using two different materials, the necessary coordination of the employer or his representative with the Plast wood installation group is required.

Longitudinal distances, type of screw,

drilling holes and other items mentioned in the floor section are also valid for facade installation.

Installing Plast wood tile mosaic:

Mosaic tile is a 30 × 30 cm square that is made by assembling three 9.5 cm decks or four 7 cm decks

(depending on the customer’s taste) cut on a plastic outsole.

Plastic soles are male and female and can be paired very easily and quickly,

and you no longer need a metal chassis and a skilled installer to install it.

The point about mosaic tiles is that Plast wood tends to shine because it is a combination of wood powder and polymer, and when installing this problem with metal chassis and creating a distance of half an inch (distance that T Creates) disappears, but in tile mosaics, such as plastic wood, it is only attached to the plastic outsole with screws if it is placed in an environment such as around a pool that is constantly exposed to water; Water remains between the grooves of the plastic outsole, and if it freezes, it puts pressure on the plastic wood profiles and sprays the product properly.

The best suggestion for using mosaic tiles is exhibition booths, which are installed in the fastest possible time and without the cost of this product, and after finishing the work, it is assembled and can be used again in another place. Also, in small terraces that have a roof and their floors are not exposed to direct sunlight, to prevent dirty work (welding, cutting branches of plastic wood and scattering of wood chips in the environment, etc.), mosaic tile can be used as the best Used the option for flooring.

The post Install plastic wood flooring appeared first on choobinplast.

its durability and strength has increased compared to other woods.

While plastic wood from the beginning with the approach of environmental protection

is produced from a combination of wood powder and recycled plastics with a special process

that has completely different and valuable properties than thermowood,

which can be slow burning, waterproof, Long life, no need for staining, resistant to pests, etc. noted.

In fact, plastic wood is a wood product that has all its properties while being free from its disadvantages.

The post The difference between thermowood and plastic wood appeared first on choobinplast.